AIMS Power 150W Modified Sine Wave Inverter 400 Watts Surge 12V PWRINV150W

Automotive

AIMS Power

vehicle-power-inverters

Description

Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by a Modified Sine Wave Power Inverter is “blocky” resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road. Therefore because of the type of waveform the Modified Sine Wave Power Inverters produce they are suitable for most applications. Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you’re looking to make a pot of coffee run a heater or air conditioner or appliances that can withstand occasional electrical noise a Modified Sine Wave Inverter is a cost-effective solution.

Features
  • 150W continuous power
  • Modified sine wave
  • Green LED on front panel to confirm power on
  • Red LED on front panel to warn of a faulty condition
  • Dual ac receptacles
  • On/off switch
  • Over Temperature protection
  • Over Load protection
  • Noise free operation. Includes a thermal cooling fan.
  • Enclosed cigarette lighter connections with built in fuse
  • AC output short circuit protection
  • Auto reset on most fault conditions
  • Aluminum case for optimal cooling
  • Instruction manual
  • Free tech support
  • 1 Year Warranty
Specifications
  • Continuous output power: 150 Watts
  • Surge power capability (peak power): 400 Watts for ~40ms
  • DC input / operating voltage: 10 to 15 Volts
  • Output voltage: 120 Volts ac
  • Output wave form: modified sine wave
  • Output frequency: 60 Hz
  • Battery low voltage alarm: 10.5 +/- 0.5 Volts
  • Battery low voltage shutdown: 10.0 +/- 0.5 Volts
  • No load current: < 0.3 Amps
  • Full load efficiency: 90%
  • 1/3 load efficiency: 95%
  • No load minimum operating temperature: -15 degrees Celsius
  • Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown)
  • AC Output Socket Type: single Type 2 -3 prong
  • 20 amp spade fuse
  • High input voltage protection: 15V
  • Low input voltage shutdown: 10V
  • External fuse protection
  • Product size (L x W x H): 4”X 3.25”X 2”
  • Weight: 13 oz